Showing posts with label jeep. Show all posts
Showing posts with label jeep. Show all posts

Monday, July 20, 2020

Fuel Menace Wheels on Sting Grey Jeep Rubicon w/ Nitto Ridge Grapplers

I recently purchased and installed a newly designed and released Fuel Wheel on my Sting Grey Jeep Wrangler Rubicon Unlimited JLU 2019.


The Fuel Menace Wheels come in an Anthracite and Machined color combination which, to me, is much better than the black wheels everyone is sporting nowadays.  They come in 17" with 4.5" or 5" backspacing and are listed as Fuel Model D684.   As of this writing (early summer 2020), they are not that easy to come by.  Quadratec was the only place that had them.

I have a non-lifted 2019 Jeep Rubicon JLU (4 door) in Sting Grey.  I wanted to maintain the excellent road quality while having a slightly more aggressive look to the vehicle.  I didn't want to get involved in lifts (the Rubicon JL has a stock 1" lift already), but was interested in something a bit different than the standard ride.  I decided to go with a tire I have some history with, the Nitto Ridge Grappler.  I have owned both BFG KO2 tires and Nitto Ridge Grapplers in the past. 

I think the road quality of the stock Rubicon 33" BFG KO2 is slightly better, and just a tad quieter, but I attribute that to the fact that the Ridge Grapplers are both bigger and much wider than the stock Rubicon 33"s.  The Ridge Grapplers have a much better aggressive appearance and handle slightly better offroad; while still maintaining a decent ride quality.

Ultimately, I paired the Fuel Menace wheels with 5" backspacing with LT305/70R17 Nitto Ridge Grapplers on my Jeep JLU Rubicon 2019 in Sting Grey.   This gets me a 35" tire experience without worrying about tire rub or needing a lift.   The Nitto's measure 34.4 x 12.4" at this size.  For reference purposes, the KO2's 35" tire (KO2 35X12.5R17LT) actually measures at 34.5" x 12.5", just a hair bigger in both directions than the Ridge Grapplers.

I think the combination looks great.   The fact that no lift is required is a huge bonus.  The tires do stick out from the fender just a tiny bit, I would say just under 2 inches.  They might just fail the coin drop test, but you'd need a really aggressive cop to pull you over for it.

The Fuel Menace 17" Rim with Nitto Ridge Grapplers fit onto the stock tire carrier with enough clearance and no rub too.

Buy: Nitto Ridge Grappler - LT305/70R17 
Buy: BFGoodrich alternative 35" KO2 - 35X12.5R17LT 
Other Posts about this: 2019 Sting Grey JLU Wrangler Rubicon









Thursday, June 6, 2019

Replacing Alpine Stereo in JL Jeep Wrangler

This post is about a complete stereo upgrade to a 2019 Jeep Wrangler Unlimited.  I replaced the upgraded UConnect Alpine 8.4 system speakers and Alpine subwoofer to something substantially superior.  Read on to learn about this $2,500 to $3,500 Jeep JL Stereo Upgrade...

I have a 2019 Jeep Wrangler Rubicon with the upgraded 8.4 Alpine stereo and alpine speakers/subwoofer.   While this Alpine was a huge improvement over the stock Jeep Wrangler stereo, it still wasn't exactly what I was looking for.  This was especially true when I had the sky one-touch top open, the Alpine sub and speakers had a hard time overpowering the wind noise from having the roof off of the Jeep.

So, I set about looking at my options to replace the Jeep Wrangler Alpine stereo and Alpine subwoofer. I quickly discovered the JL Audio Stealthbox for 2018-Up Jeep Wrangler Unlimited.   The model number is: SB-J-JL4DDRV     This is actually a pretty difficult speaker to research because of the confusion of "JL Audio" and a Model "JL Jeep".   Note that JL audio is by far one of the absolute best manufacturers of speakers, and it can get a bit tricky googling them for a JL Jeep unlimited.


Here is a picture of an Alpine Subwoofer and Jeep Alpine Speaker Enclosure removed from a 2018/2019 JL Wrangler Unlimited: 



First off, a few points: 

  • The SB-J-JL4DDRV JL Stealthbox subwoofer is NOT compatible with the 2 door Jeep Wrangler, it is only compatible with the JL Unlimited Wrangers from model years 2018 and up.  I have a 2019 and it fit perfectly.    
  • Second, this subwoofer, powered by the proper amplifier, will blow the doors of the Jeep (see what I did there..)   Seriously though, the upgrade of the JL Stealthbox over an Alpine subwoofer is astounding.   It can handle way more volume, it can hit faster highs and deeper lows, it is incredible for what they packed into the footprint.  Further, it actually takes up LESS room than the factory-installed Alpine subwoofer in your JL Jeep.
  • It is NOT plug and play.  You'll need to install an amplifier and run wires to the Stealthbox subwoofer itself.

Let's get into the JL subwoofer install and swap for the Alpine Subwoofer in my Rubicon.... But, a word of caution, the model listed above is actually for the driver side wheel well installation, it does not replace the factory installed Alpine subwoofer.   I decided I didn't want to do that, and instead installed the JL Stealthbox in the original location of the factory subwoofer in my Alpine upgraded JL Wrangler.   In other words, I only wanted one speaker, and I wanted to replace the existing Alpine that was there.  Unfortunately, several high-end installers said that replacing just the sub itself would not accomplish my sound goals (deeper bass and louder bass), and they all recommended getting a completely new enclosure too; so the stealthbox made a lot of sense. 

Photo of a JL Audio Stealthbox installed in place of an Alpine Subwoofer in a 2019 Jeep Wrangler Rubicon Unlimited


As such, I decided to do a complete swap and replace of the subwoofer and plastic surrounding it.   This became a bit more complicated, but I am very happy with the results.  Instead, of a driver's-side JL Stealthbox, I used the passenger side JL Stealthbox for my JL unlimited jeep.  This unit's model number is: SB-J-JL4DPAS   Note: they make 2ohm and 4ohm units of the passenger and driver side JL Jeep JL Stealthbox subwoofers.

In order to replace the factory Alpine subwoofer, you need to order some replacement parts from Mopar/Jeep in order to make the back look stock again.  You see, the Alpine subwoofer and enclosure actually takes up most of the passenger side rear cargo area in the Jeep JL.  So, when you pull it out, you'll need several trim pieces to replace it with when you put the JL Stealthbox in place.  Here are the same (or similar parts) to what I needed to buy from Mopar when I replaced the Alpine subwoofer enclosure:


  • (x1) 6LU84TX7AD
  • (x1) 6BM34TX7AA
  • (x1) 6QJ13TX7AA
  • (x1) 6BP30TX7AD
  • (x1) 6BM28TX7AC
  • (x1) 6BM29TX7AC
  • (x30) 6510407AB  <--- these are the clips that go on the back of the panels, we used all new ones to ensure there were no unwanted rattles


Now, you'll need to be careful when you buy each of the above items.  If you have the rear back-up sensors or lane assistance, you might find a similar model to each part that includes an extra adapter or plug here-or-there.  That being said, all of the parts are available from your dealer or online (Mopar) and they are all black no matter what color jeep you have.  As far as I know 2018 and 2019 Jeeps are the same parts.  I have a 2019, but I ordered parts for a 2018 Jeep Wrangler.

With the above parts, an Alpine PDX-V9 Amplifier  and some other parts, I successfully replaced the Alpine subwoofer in the JL Jeep Wrangler Unlimited with a JL Audio Stealthbox.   The sound is absolutely incredible, and I have zero regrets.

But, if you are going to do the work of installing all of that, you might as well upgrade the rest, right?!



I also swapped out all of the rest of the speakers on my JL Jeep with Focal high-end speakers, and they sounds awesome too! 

So, here is the rest of the inventory:
(x1) Alpine PDX-VP 5-Channel 900W Amp with wiring kit - installed under passenger seat
(x1) Focal Access 100AC 2-way speakers in the soundbar
(x1) Focal ES 100K 4" 2-way components for the front w. crossover
(x1) PAC AmpPro Optical Interface 

I had this complete stereo installed by a high-end installer, and inclusive of taxes; it came to $3,500.  I was able to sell the factory Wrangler Alpine subwoofer, enclosure, and old speakers for $400 easily on Facebook Marketplace.   So, for about $3K, this was not a cheap upgrade, but it was an incredible one.  I think, with some shopping, and doing the work yourself, you could do this whole thing under $2,500 if you sell your old equipment.

The sound quality is outstanding, and the volume is able to hold up to the roof being down and the doors being off of my JL Jeep Wrangler.  Further, the quality of the voice and vocals are incredible, and it doesn't just sound like noise, it sounds like music.  If you can swing this stereo upgrade on your Wrangler JL, you will not regret it.  I kept the factory head unit, and aside from the subwoofer enclosure, which still looks very much like the OEM Mopar/Alpine original, everything else looks completely stock.


Alpine Subwoofer for JL Jeeps terms for search engines:

  • Replacing Alpine Subwoofer in Jeep Wrangler
  • Replacing Alpine Speakers in JL Jeep
  • Swapping JL Stealthbox in JL Jeep
  • Stereo Upgrade in Jeep Wrangler JL
  • Speaker Replacement in Jeep Wrangler JL 
  • Photos of JL Stealthbox in Jeep Wrangler Unlimited JL
  • Replacement OEM parts when removing Alpine Subwoofer from JL







Thursday, April 4, 2019

Sting Grey Jeep Rubicon with Tinted Windows

Here are before and after photos of a 2018/2019 Jeep Wrangler Rubicon in Sting Grey before and after window tint.
Before window tint, factory dark rear windows (standard on JL)

After, added 50 llumar tint to the rears for heat reduction and 30 llumar tint to front two windows of the JL Rubicon.  It came out darker than I expected in the front.

-------------
Pictures of Windows Tint on Sting Grey Jeep Wrangler
Wrangler JL with Windows Tint
Pictures of 30% front tint on JL Wrangler



Tuesday, April 2, 2019

Bull Bar for Jeep JL Steel Bumper

Here are some pictures of a Mopar aftermarket Bull Bar on the 2019 Jeep Wrangler Rubicon JL.
This is a Sting Grey Jeep JL 4 door with the Mopar (over rider brush guard) mated to the factory Jeep steel bumper.   Installation was a breeze, as long as you have the Jeep Torx kit that came with your JL Wrangler.



The Mopar 82215351 Jeep Wrangler Grille and Winch Guard is an exact match in color and texture as the stock Rubicon JL bumper.  It is a bit smaller for a true bull bar, but is a nice little addition for around $215 bucks.


Buy it from Amazon with free shipping, cheaper than Mopar direct:



This blog post showed you pictures of the Mopar Winch Guard installed on a 2019 Jeep Wrangler Steel Bumper Rubicon. This Grille guard fits Fits the 2018-2019 Jeep Wrangler JL 2 door and 4 door models with the steel bumper package.

Sting Grey Mopar Winch Guard
JL Wrangler Brush Gaurd
Rubicon brush guard JL Jeep
Pics of Jeep Wrangler with Mopar Brush Guard

Monday, March 13, 2017

34" Nitto Ridge Grappler on Fuel Beast Jeep JK

This post is a series of pictures showing the Nitto Ridge Grappler 305/70-R17 Tires on 17"x9" Fuel "Beast" Rims.  The below images show the Nitto Ridge Grappler 30/70R17 rubber tires on 17x9 Fuel Beast Wheels on a 2011 2 Door Jeep JK Wrangler in Cosmos Blue.  They Nitto Ridge Grapplers are roughly 34" tires and I find to be a great alternative to traditional 35"s on a Jeep JK.  They are nicer than the standard 33 (which often measure less than 33), but not as aggressive as the full 35s.  I find this setup to be a perfect combo on modern JK.


This image shows the rear quarter view of installed Nitto Ridge Grappler 305s on 17" fuel beast tires installed on a GSI Bumper and Tire Carrier .

Above is more pictures of the Fuel Rims with Nitto Tires installed on a Wrangler Sport 2 Door Model JK.

 
 And more photos of Ridge Grapplers on Fuel Rims on a Jeep.

Some more information.
The Fuel Beasts are a "Dark Tint" color.  It's pretty sharp looking; and is a good deviance from the typical black rims everyone is sporting nowadays.  The color itself I would describe as a lighter shade of brake dust, but that's not a bad thing.  They aren't very "flashy" so you don't look like a total mall-crawler; but they aren't as plain as the AEV Pintler Wheels that everyone seems to be buying.

I have the Fuel Offroad D564 Beast 17x9 with 5" backspacing installed on a 2.5" lift.  I did not require spacers for the setup.
These installed tires (at 35PSI) are Nitto Ridge Grappler 305-70R17
They measure in at just about 34" flat to flat, but when the weight of the Jeep is on them, I'd say they come in just a hair under that measurement.    They really are a nice looking tire; as they look almost as aggressive as a mud terrain.  That being said, their road manner is amazing; extremely quiet and comfortable.   I've not yet had the Ridge Grapplers off road, so can't report on that yet.   They do just fine in the rain on my Jeep JK.    The Nitto Ridge Grapplers have two sides to the sidewall.  One has more "lugs" than the other if you want a slightly toned-back look.


Buy the Nitto Ridge Grapplers for your JEEP:


Buy the Fuel Beast Offroad Wheels for your JEEP:



Wednesday, February 15, 2017

GSI Jeep Wrangler Rear Bumper

Here is a quick review of the GSI Jeep Wrangler Rear Bumper with Tire Carrier installed on a 2011 2 Door Jeep Wrangler JK.   Buy the inexpensive GSI bumper on Amazon
You will not find a cheaper bumper and tire carrier for a JK than this unless you hit the used market.  So far, I am really impressed with the GSI Jeep Wrangler bumper with tire carrier. 


  1. GSI Bumper Shipping was relatively prompt.  Received within 8 days.
  2. Packaged well in two boxes, one for the GSI bumper, one for the GSI tire carrier.
  3. Install was straight forward
  4. Build quality of the GSI bumper, on the surface, seems solid.  Heavy duty, good paint, no scratches, lenses for LEDs all lit, etc.
  5. The locking latch is a little difficult (tight to operate) with not enough clearance.  I'm hoping this loosens up in time.
  6. If you don't have a trailer harness hitch, you need to splice into your turn signals.  Do yourself a favor and buy this trailer harness tap kit first around $20:  http://amzn.to/2kHjMQb
Overall, yes, I would recommend the GSI Jeep Wrangler Rear Bumper with Tire Carrier.  Let's see how it holds up with time.

Item List:
 GSI 07-16 Jeep Wrangler JK Rear Bumper with Tire Carrier, Smoke Lens Model GSJW1169
Tyger Electric Wiring Kit (Trailer Harness Tap) 


Tuesday, February 14, 2017

BestTop Trektop Pro on 2 Door Jeep JK

I recently installed a Besttop Trektop Pro Hybrid Soft Top on my 2-door Jeep Wrangler JK.   My jeep JK has half doors, and I figured this would be a good place to post photos for people of what a Trektop Pro Hybrid top looks like with a 2 door jeep that has factory half doors.
The hybrid top is the best of both a soft top and a hard top for jeeps.  Buy it on Amazon.


Here is the best top pro hybrid on a 2 door JK wrangler.  on back is a 34" Fuel Beast and Nitto Ridge Grappler combo on a GSI bumper.
In this photo, you can see the rear hatch is a solid window, not a stupid zip up.












Photo of the Trektop Pro hybrid on a 2 door without rear tire installed.



More photos of a Best Top Pro Hybrid Top on a 2 door Jeep Wrangler 2011 JK in Cosmos blue with half doors.

Sportfish Body Armor for 2 Door JK

Took a small gamble and bought some mirror protection armor for my 2 door Jeep JK wrangler.
I found this stuff on Amazon for less than $12, so it wasn't that much of a risk.  http://amzn.to/2ku8pKd

Here is a couple photos of the: Sporthfish Cowl Body Armor Powder Coated Finish Outer Cowling Cover for Jeep Wrangler JK Rubicon Sahara Sport X & Unlimited 2/4 door 2007-2015
 
Passenger Side Photo of the Sportfish Mirror Armour 
Drivers side photo of the body armour cheap inexpensive mirror protector on a 2011 JK 2 door.    As far as a review of the Sporthfish Cowl Body armor, there is not much to say.  It was inexpensive, a perfect fit on a 2011 Jeep JK, looks good, had 3m double sided tape, and I am satisfied for the price.  I don't know how it will fair in weather and sun yet, so I will keep you posted, but if you have to replace this every few years, its not a big dead.
The color is a muted black, not as deep as I would have wanted, but you can't beat the price.  Make no mistake though, this is plastic.

Buy it here:  Cheap Mirror Protector for Wrangler

Rugged Ridge Modular Jeep Bumper - All Terrain Bumper Photos

I had trouble tracking down good photos of a Rugged Ridge All Terrain Modular Bumper for a JK Jeep Wrangler 2 door before I purchased it.   Below are example pictures and photos of the Rugged Ridge Modular bumper system for JK Jeeps with and without various modular bumper components.

You can buy the Rugged Ridge All Terrain Bumper with Free Shipping from Amazon here: http://amzn.to/2l55R7o

Below: Photo of Rugged Ridge Modular All Terrain Bumper on Jeep 2 door JK Wrangler Front view, without end caps and without over rider bull bar. This is a stock lift, 32" stock tire photo of the Jeep with a Modular bumper.

And here is the Rugged Ridge Modular Bumper with a bull bar, or over rider as they call it.  This is also the stock lift and stock 32" wheels on the 2 door JK Wrangler.  Note, this rugged ridge all terrain bumper photo shows the bull bar but does not have the stubby end caps installed.
  

And last but not least, here is a photo of the Rugged Ridge All Terrain Bumper with Over Rider and Stubby End Caps installed on a Cosmos Blue Jeep JK 2 Door.  Subtle, but makes a big difference.




This is the same jeep as before, but it is now lifted.  This is a 2.5" suspension lift with:
 34" Nitto Ridge Grappler Tires,
All Terrain Stubby Bumper End Caps  
Inexpensive Blue D-Ring Schackles

Wednesday, November 23, 2016

Inexpensive Compact Subwoofer and Amp for 2 Door Jeep Wrangler

I was looking for a way to add some inexpensive bass to a 2 door jeep wrangler JK without sacrificing the already tiny jeep trunk space.    I looked at several under-seat compact subwoofers including the Kicker Hideaway 8" subwoofer that bestbuy sells.   Unfortunately, I quickly realized that while the Kicker hideway has good ratings, it doesn't exactly fit under the front seats.   First, you have to remove the seat to install it.  Second, you have to move some wires (if you have an airbag)  Third, in the 2 door JK Jeep, when you slide the seat forward (to let kids/dogs in the back), the speaker is slightly exposed and makes it a target for stepping on or being kicked.

So ultimately, I figured out that the only place that I could install an all-in-one (sub and amp in one) compact sub was to do it on the rear tailgate.   I was a bit concerned with the overall dimensions of the Kicker unit, and having just dropped a small fortune installing the NEX 4200 and idatalink Maestro into the 2011 JK  into the Jeep, I thought it best to see if my good friend Amazon presented any cheaper alternatives.

So, searching Amazon produced a (low cost) cheap alternative to the Kicker hideway sub and amp combo.  I stumbled across a company I'd not heard of called Rockville, who had the perfect subwoofer product for a 2 door Jeep JK.   So, I wound up ordering the 10" all-in-one amplifier and custom low profile subwoofer for my Jeep Wrangler 2 Door JK.   
See Rockville Sub


After receiving the product, here were my impressions.
  1. Price is outstanding, it hoovers between $110 and $125 and ships free with Prime
  2. Build quality, on the surface, is amazing.  It feels solid, made of metal.  Doesn't feel cheap in any of the materials
  3. It has a nice paint color (bonus, it compliments the 2011 Cosmos Blue Jeep very well)
  4. It includes everything you would want with the exception of the power wiring for the amplifier.
  5. It includes a remote wire and knob. This remote subwoofer knob cost $40 alone in my Alpine/JL setup in my other ride; and adds $25 to the kicker option mentioned above.

So, next was installing the cheap integrated low profile subwoofer onto the rear tailgate of the 2 Door Wrangler JK.   I'm not going to walk you through all the basics of installing a sub/amplifier here, if you don't know how to do it, you should follow a guide online, or pay the $125 or so to have BestBuy install it for you (buy your parts/wires ahead of time; don't buy them at BestBuy!).   However, I will provide the pictures below of what it looks like.    I would HIGHLY RECOMMEND at least a single piece of Dynamat for sound-dampening behind the Rockville subwoofer, or your Jeep will sound like one big rattle can (whatever that is).   I bought a GTMAT ONYX sound dampening kit, and only used a single sheet.  A bonus is that it was self adhesive and I didn't even need to cut anything, it was the perfect size!

The verdict: I'm happy.   Now, let's be real... This thing is not going to shake the neighborhood.  In fact, with this sub, you'll barely feel the thump in the jeep at most normal volumes.   But, turn up the stereo loud and you'll get a bit of that bump going.  The sub does a really good job of filling in what the 6.5" and tweeters in the JK are missing.  Keep in mind, I have aftermarket speakers/head unit/and an Alpine power bar; so I'm not just working from stock.  I find the dynamics of the Jeep, especially with a soft top and half doors not to support good sound.  This compact sub helps fill in what's missing at a low price point, without sacrificing your valuable trunk space.  It's not for an audiophile, and not great for heavy beats, but to feel in rock music, it does the job.  For $150 total cost installed for the do-it-yourselfer or under $275 total to have it done for you at your local BestBuy.

Parts list for a compact sub and amplifier install of a Jeep Wrangler 2-Door JK:
1.) Rockville 10" 800 Watt Slim Profile Sub:  ~$115
2.) Boss Audio Amplifier Wiring Kit, 8 Gauge:  $11.00
3.) Dynamat Alternative: GTMAT:  $24.99










Thursday, October 27, 2016

Pioneer AVH-4200NEX with idatalink maestro rr and a Jeep 2011 JK 2 door Sport

Installing a idatalink maestro RR into a JK Jeep Wrangler 2 Door Sport with a Pioneer 4200 NEX head unit.

I recently bought a 2011 Jeep Wrangler Sport 2 door (standard transmission).  Overall, it is a no-frills vehicle missing pretty much all of the power options.  It does however have UConnect connectivity package (using steering wheel controls and Bluetooth), heat and AC.

For what it is, the standard stereo on the JK Jeep is not too bad.  It came with the standard setup, 4 speakers and two tweeter separates.   Basically, it could get loud, but the quality is poor and base and mid-range is non existent.   One thing is though the bluetooth speaker works excellently.   The pairing and uconnect commands/interface are a bit of a mess though.

I decided that I wanted to swap out the head unit with something that had a little bit more function, as well as the ability to drive some new speakers better.  (The old speakers are paper cones).   I looked around, and ultimately felt that the Pioneer AVH-Pioneer 4200 NEX was the most cost effective solution that I could get that had the functionality of Android Auto.  (It also supports Apple Play.)

As I was swapping out the unit, I did want to maintain the factory radio controls, and was looking for what the appropriate mess of wiring harnesses and adapters would be needed to make it all work.  This is where I learned of the maestro RR for the first time, by a surprisingly competent BestBuy installer.

The maestro RR is a simple box that interfaces directly with both the existing systems/controls of your car as well as the car's OBD-II (computer) and the head unit itself.   What's really cool about it, aside from being a substitute to traditional adapters/harnesses, is its ability to interface with the vehicle's computer.    This means that (paired with the  Pioneer 4200 NEX or other suitable head unit) that it can do creative things, such as access engine diagnostics and other features that a stripped down car like mine doesn't have by default.   Since the Maestro RR only added about $80 total to the install vs. traditional adapters, I decided to take the risk.   I was really curious to see what a stripped down version Jeep Sport like mine would show in the interface.


So, long story short, I wound up getting the install done at BestBuy because I just don't have the time or energy anymore to do these myself.

 The whole install took a full day, that's for the 4 speakers, 2 tweeters, head unit, alpine power bar (mini amp), maestro, and a Pioneer backup camera.



So, what's the verdict?  What can you expect to see on the idatalink Maestro and Pioneer integration with a JK Jeep Sport circa 2011?    Well, I wasn't expecting to see too much, but I was happy with the results.   You can:
  • Get alerts and read engine codes if a problem pops up
  • See if your doors are ajar
  • See RPMs
  • See Fuel level
  • See instant MPG (real time based on driving habits)
  • MPH gauge,
  • Range until empty
  • Engine intake temperature
  • Battery condition
  • And the most exciting thing for me was the ability to see individual tire pressures!


So, even in a base Jeep sport, the Maestro RR and Pioneer 4200 NEX have some pretty useful information to display.  I definitely was satisfied with the purchase.

Buy cheapest at Amazon:

Update:  I added a cheap subwoofer and amplifier combo into this JK set up.  Check out the thread.